MCQs on Forensic Physics

Enhance your Knowledge of Forensic Physics by taking this test.

Best of luck.

#1. Vicat apparatus is used for analysis of cement to observe:

#2. Some crystalline materials have two indices of refraction. The phenomenon is called:

#3. Pyrolysis gas chromatography is useful technique for characterization of the following paint constituents:

#4. Nodes are seen in the following fibre:

#5. During forensic examination of glass, the edge thickness can be measured by:

#6. An indentation mark is caused by a tool, when it is pressed upon a surface:

#7. Emulsion is a coating on all photographic films and papers consisting of light sensitive silver salt in a:

#8. Pitch of male human speech sound ranges between:

#9. The following material is most suitable for toolmark casting:

#10. The turbidity test in the sandy soil sample when conducted experimentally:

#11. The video editing in digital video format is:

#12. Hot stage microscope is used in forensic examination of glass of measure:

#13. For preservation of shoe print/tire marks on soft earth, the best way is:

#14. The following process is responsible for formation of soil:

#15. The process which leaves impressions on the reverse side of the note is:

#16. Hammer Marks are:

#17. Aluminum, calcium, magnesium and cobalt are components of:

#18. Radial fracture of glass can be helpful in determining:

#19. Which type of identification mark (serial number) on metal surface cannot be restored after obliteration?

#20. From the tire impressions left at the crime scene, it is possible to determine:

#21. The technique used for comparison of trace element profile of soil samples is:

#22. The best material for casting the pattern on metallic surface is:

#23. In the case of firing through windowpane glass, spiral fractures are found on:

#24. During gravimetric method of cement analysis, filtrate –D is used for calculation of:

#25. 4-R rule is connected with:

#26. A tyre track impression in the snow can be classified as:

#27. Those materials which show ‘Birefringence’ phenomenon is known as:

#28. 4R rule of glass fracture relates to:

#29. Soil sample when moistened with few drops of water and Conc. HCl gives yellow colour due to presence of:

#30. Compression tool marks are best formed by:

#31. The following parameters of tool application can produce the sufficient influence on the nature of striation marks produced by screw driver, except:

#32. Which of the following techniques can be used in analysis of fibres?

#33. Which technique is best suited for distinguishing most paint formulations?

#34. Which mode of illumination is the best for studying striated tool marks?

Next

#35. The comparison of test and scene tool marks is usually performed using:

#36. How should soil samples be preserved if they can't be subjected to forensic tests soon after collection?

#37. The binder composition of paint is provided by:

#38. Thickness of a specimen entirely in focus under a microscope is known as:

#39. Scales are found on the following fibre:

#40. ‘Ballooning effect’ test is characteristics of:

#41. IR Spectroscopy is used in the analysis of:

#42. Compressive strength analysis is done in case of:

Next

#43. The wavelength of x-ray:

#44. Which of the following filters are useful for photography on a shining surface?

#45. Black mineral colours in the soil are generally related to the presence of the following elements:

#46. Which technique is non-destructive for identification and quantitation of trace elements of forensic samples?

#47. Control soil samples for forensic analysis is best collected in:

#48. _______ is a super cooled liquid which has attained so high viscosity as to be considered as solid.

#49. Which one of the following is added to the clinker to prevent the rapid reaction?

#50. Mull technique is used for the sampling of:

#51. Besides silica, the main constituents of dolomite soil is:

#52. What is required in order to estimate the speed of vehicle from the length of skid?

#53. In trap cases, the pink colour of ‘Phenolphthalein’ fades due to:

#54. Bromoform is a high density liquid used in ‘Density Gradient Analysis’ of soil analysis can be replaced by:

#55. Which statement is true when a pointed object makes impact on a window glass pane?

#56. A crater – shaped hole in glass is _______ on the side where the projectile entered the glass:

#57. The following follows 3-R rule:

#58. Linen fibre possesses:

#59. The example of the Vegetable fibre is:

#60. Nodes are seen in:

#61. The following is a regenerated fiber:

#62. Which of the following has the shortest wave length?

#63. A bright halo observed near the border of a glass particle immersed in a liquid of a different refractive index is known as:

#64. The following form of paint sample is most suitable clue in forensic paint analysis:

#65. The following percentage of ridge matching is a positive proof of matching in striation tool marks examination:

#66. Heat resistant glass contains a mixture of silica (75% to 80 %) and which one of the specific constituent (upto 15%):

#67. Which of these fibers are derived from animals?

#68. The refractive index (RI) of most of the glass sample encountered during forensic examination range between:

#69. Fractures due to heat are:

#70. The Refractive Index of glass can be determined by:

#71. Which acoustic parameter is associated with the characteristic features of the oral cavity?

#72. In density gradient determination method of soil examination, the following liquids are commonly used:

#73. Floatation method used for the analysis of glass samples is used to determine:

#74. The following compound is not present in Borosilicate glass:

#75. The range of lime (CaO) is within ______ in Portland cement.

#76. Sequence the electromagnetic waves in decreasing order of wavelength?

#77. Which is the source of Infrared radiation?

#78. The process of formation of small droplet from the liquid sample is called as:

#79. An instrument that measures the radiant power of two electromagnetic beams is called:

#80. Composed of a Mixture of Cement, Sand and Gravel is called :

#81. Infrared spectra of paint sample without any preprocessing can be obtained by technique of:

#82. The angle of tool application should be fixed for making standard marks in:

#83. The angle of tool application should be considered for making standard tool marks by:

#84. Chemical etching is a method for restoration of erased marks on:

#85. Glass which is strengthened by introducing stress through rapid heating and cooling of its surface is called:

#86. Which one is the major ingredient in the Cement composition?

#87. Which one of the fibers is NOT the protein fiber?

#88. Besides silica, the main constituent of Gypsum soil is:

#89. Glare in photography can be best removed by:

#90. Black Mineral color in the soil is generally related to the presence of:

#91. The annealing temperature for ordinary glass is:

#92. The Ordinary Portland Cement (OPC) seized for forensic tests analysis is suitably packed in:

#93. Thermal fractures on glass sheet are of following type:

#94. Which of the following rare earth oxide is not found in ‘Nernst Glower’?

#95. Which microscope has found wide application for the examination of birefringent material present in soil?

#96. Which of the following fiber is of mineral origin?

#97. Mineralogical analysis can be done with the help of:

#98. Magnetic powders contain which of the following as one of the constituents?

#99. Bulk density test is used to determine:

#100. Which size of soil particles is termed as clay?

#101. The tire treads recorded on moldable material such as earth, clay, snow etc. are known as:

#102. In paint examination, pyrolysis gas chromatography is useful for characterizing

#103. Fibers obtained from animals or plants may also be called as:

#104. Drill marks are:

#105. Microscopic fibers are best collected from clothing with the help of :

#106. The source of sound energy for speech production in human is:

#107. Radial fractures on glass, surface starts on:

#108. Approximate percentage range of Aluminium Oxide in Ordinary Portland Cement is:

Finish

Results

-

Congratulation!!!

Try Again!!!

error: Content is protected !!

Discover more from Forensic's blog

Subscribe now to keep reading and get access to the full archive.

Continue reading